1" Storm® 50 Pump, Lifts 50 Feet / 15 Meters DTW

SKU:
 P-10340

Proactive Env Products®

The 12-Volt DC Storm® 50 is the first 12 Volt Submersible Centrifugal Pump to fit into a 1" ID Well. The Engineered Plastic 12 volt submersible centrifugal Storm® 50 pump is capable of pumping up to 50 feet from ground level (DTW)* by simply connecting the Storm® 50 to a 12 volt deep cycle battery. Its reliable design is perfect for continuous sampling and purging of groundwater wells and Low Flow Sampling (Fractional Flow®).

The 12 Volt Storm® 50 is ideal for low flow sampling (Fractional Flow®) in conjunction with Proactive Environmental Products Low Flow Sampling Controller. Low flow sample all the way down to 40 mLs per minute. To achieve even a lower flow simply add the Low Flow Sampling Control Valve in conjunction with the Low Flow Sampling controller to achieve flow rates of 10 MLs per minute or less!

Simplify and Expedite Your Next Sampling Event!

  • The Storm® 50 can operate under harsh conditions with higher turbidity.
  • The Storm® 50 can run continuously in water without the need for a cool down!
  • ​The Storm® 50 has a 150-hour motor life!
  • ​The Storm 50® has a sleek outside that minimizes well hang-ups.
  • The Storm 50® is a very reliable and economical pump that provides a great bang for your buck!

This pump is not engineered to be dedicated in liquid 24 hours a day.

Specifications:
WATT CONSUMPTION (MAX): 60 WATTS (MAX)
DC VOLT RECOMMENDATION: 12-15 DC (direct current) At Source
AMP CONSUMPTION (MAX): 4 AMPS
MEASUREMENTS: LENGTH 24" / DIAMETER: 0.9"
REQUIRED TUBING: 1/4" X 3/8" ID TUBING
SUPPLIED WITH: 60 FEET OF HEAVY DUTY 12 GAUGE WIRE, QUICK
DISCONNECT PLUG & BATTERY CLAMPS
PUMP CONSTRUCTION: ABS
IMPELLER CONSTRUCTION: POLY ACETAL (POM)
MOTOR SHAFT CONSTRUCTION: STAINLESS STEEL
WIRE CONSTRUCTION: PVC
SEAL CONSTRUCTION: NITRILE

What is included in the box:
12 Volt Storm® 50 Pump (Item# P-10340)
Quick Disconnect Plug With Battery Clamps (Item# PA-18050)

DTW (Depth to Water) Gallons per Minute
3 0.75
10 0.62
20 0.56
25 0.50
30 0.50
40 0.43
50 0.37
55 0.31

 

 

 

 

 

 

 

Test was conducted with a 12 volt deep cycle battery at 12.5 volts at battery terminals.
Running your vehicle while using this pump will dramatically increase purge volume.

See Price in Cart
$518.96
  • Description
    The 12-Volt DC Storm® 50 is the first 12 Volt Submersible Centrifugal Pump to fit into a 1" ID Well. The Engineered Plastic 12 volt submersible centrifugal Storm® 50 pump is capable of pumping up to 50 feet from ground level (DTW)* by simply connecting the Storm® 50 to a 12 volt deep cycle battery. Its reliable design is perfect for continuous sampling and purging of groundwater wells and Low Flow Sampling (Fractional Flow®).The 12 Volt Storm® 50 is ideal for low flow sampling (Fractional Flow®) in conjunction with Proactive Environmental Products Low Flow Sampling Controller. Low flow sample all the way down to 40 mLs per minute. To achieve even a lower flow simply add the Low Flow Sampling Control Valve in conjunction with the Low Flow Sampling controller to achieve flow rates of 10 MLs per minute or less! Simplify and Expedite Your Next Sampling Event! The Storm® 50 can operate under harsh conditions with higher turbidity. The Storm® 50 can run continuously in water without the need for a cool down! ​The Storm® 50 has a 150-hour motor life! ​The Storm 50® has a sleek outside that minimizes well hang-ups. ​The Storm 50® is a very reliable and economical pump that provides a great bang for your buck! This pump is not engineered to be dedicated in liquid 24 hours a day. Specifications:WATT CONSUMPTION (MAX): 60 WATTS (MAX)DC VOLT RECOMMENDATION: 12-15 DC (direct current) At SourceAMP CONSUMPTION (MAX): 4 AMPSMEASUREMENTS: LENGTH 24" / DIAMETER: 0.9"REQUIRED TUBING: 1/4" X 3/8" ID TUBINGSUPPLIED WITH: 60 FEET OF HEAVY DUTY 12 GAUGE WIRE, QUICKDISCONNECT PLUG & BATTERY CLAMPSPUMP CONSTRUCTION: ABS IMPELLER CONSTRUCTION: POLY ACETAL (POM)MOTOR SHAFT CONSTRUCTION: STAINLESS STEEL WIRE CONSTRUCTION: PVCSEAL CONSTRUCTION: NITRILE What is included in the box:12 Volt Storm® 50 Pump (Item# P-10340)Quick Disconnect Plug With Battery Clamps (Item# PA-18050) DTW (Depth to Water) Gallons per Minute 3 0.75 10 0.62 20 0.56 25 0.50 30 0.50 40 0.43 50 0.37 55 0.31               Test was conducted with a 12 volt deep cycle battery at 12.5 volts at battery terminals.Running your vehicle while using this pump will dramatically increase purge volume.
  • Data Sheets

The 12-Volt DC Storm® 50 is the first 12 Volt Submersible Centrifugal Pump to fit into a 1" ID Well. The Engineered Plastic 12 volt submersible centrifugal Storm® 50 pump is capable of pumping up to 50 feet from ground level (DTW)* by simply connecting the Storm® 50 to a 12 volt deep cycle battery. Its reliable design is perfect for continuous sampling and purging of groundwater wells and Low Flow Sampling (Fractional Flow®).

The 12 Volt Storm® 50 is ideal for low flow sampling (Fractional Flow®) in conjunction with Proactive Environmental Products Low Flow Sampling Controller. Low flow sample all the way down to 40 mLs per minute. To achieve even a lower flow simply add the Low Flow Sampling Control Valve in conjunction with the Low Flow Sampling controller to achieve flow rates of 10 MLs per minute or less!

Simplify and Expedite Your Next Sampling Event!

  • The Storm® 50 can operate under harsh conditions with higher turbidity.
  • The Storm® 50 can run continuously in water without the need for a cool down!
  • ​The Storm® 50 has a 150-hour motor life!
  • ​The Storm 50® has a sleek outside that minimizes well hang-ups.
  • The Storm 50® is a very reliable and economical pump that provides a great bang for your buck!

This pump is not engineered to be dedicated in liquid 24 hours a day.

Specifications:
WATT CONSUMPTION (MAX): 60 WATTS (MAX)
DC VOLT RECOMMENDATION: 12-15 DC (direct current) At Source
AMP CONSUMPTION (MAX): 4 AMPS
MEASUREMENTS: LENGTH 24" / DIAMETER: 0.9"
REQUIRED TUBING: 1/4" X 3/8" ID TUBING
SUPPLIED WITH: 60 FEET OF HEAVY DUTY 12 GAUGE WIRE, QUICK
DISCONNECT PLUG & BATTERY CLAMPS
PUMP CONSTRUCTION: ABS
IMPELLER CONSTRUCTION: POLY ACETAL (POM)
MOTOR SHAFT CONSTRUCTION: STAINLESS STEEL
WIRE CONSTRUCTION: PVC
SEAL CONSTRUCTION: NITRILE

What is included in the box:
12 Volt Storm® 50 Pump (Item# P-10340)
Quick Disconnect Plug With Battery Clamps (Item# PA-18050)

DTW (Depth to Water) Gallons per Minute
3 0.75
10 0.62
20 0.56
25 0.50
30 0.50
40 0.43
50 0.37
55 0.31

 

 

 

 

 

 

 

Test was conducted with a 12 volt deep cycle battery at 12.5 volts at battery terminals.
Running your vehicle while using this pump will dramatically increase purge volume.