Monsoon® Plastic Pump Lifts 120' / 37 Meters DTW
- SKU:
- P-10500
Proactive Env Products®
The Engineered Plastic 12-volt submersible centrifugal Monsoon® pump is capable of pumping up to 120 feet from ground level (DTW)* by simply connecting the Monsoon® to a 12-volt deep cycle battery via a Power Booster 2 Controller. The Monsoon's reliable design is perfect for continuous sampling and purging of groundwater wells.
The Power Booster 2 or Low Flow with Power Booster 2 is required to operate this pump.
The 12 Volt Monsoon® can be used for low flow sampling (Fractional Flow®) all the way down to 40 mLs per minute. Need to get even lower?? How about 10 mLs per minute in conjunction with the Low Flow Sampling Control Valve.
Simplify and Expedite Your Next Sampling Event!
Monsoon® can operate under harsh conditions with higher turbidity.
Monsoon® can run continuously in water without the need for a cool down!
Monsoon® has a 400 hour motor life!
Monsoon® has a sleek outside that minimizes well hang-ups.
The Monsoon® is a very reliable and economical pump that provides a great bang for your buck!
This pump is not engineered to be dedicated in the physical liquid 24 hours a day.
Specifications:
WATT CONSUMPTION (MAX): 450 WATTS (MAX)
DC VOLT RECOMMENDATION: 12-15 DC (direct current) At Source
AMP CONSUMPTION (MAX): 30 AMPS
MEASUREMENTS: LENGTH 20" / DIAMETER: 1.82"
REQUIRED TUBING: 3/8" or 1/2" ID TUBING
SUPPLIED WITH: 130 FEET OF HEAVY DUTY 10 GAUGE WIRE & GREEN CONNECTOR
PUMP CONSTRUCTION: ABS
IMPELLER CONSTRUCTION: POLY ACETAL (POM)
MOTOR SHAFT CONSTRUCTION: STAINLESS STEEL
WIRE CONSTRUCTION: PVC
SEAL CONSTRUCTION: NITRILE
DTW (Depth to Water) | Gallons per Minute |
10 | 4.40 |
20 | 4.20 |
40 | 3.50 |
50 | 2.80 |
70 | 2.10 |
80 | 1.90 |
85 | 1.60 |
100 | 1.50 |
110 | 1.25 |
120 | 1.00 |
140 | N/A |
Test was conducted with a 12 volt deep cycle battery at 12.5 volts at battery terminals.
Running your vehicle while using this pump will dramatically increase purge volume.
PFOA Update - This Pump Is PFOA Free
-
Description
The Engineered Plastic 12-volt submersible centrifugal Monsoon® pump is capable of pumping up to 120 feet from ground level (DTW)* by simply connecting the Monsoon® to a 12-volt deep cycle battery via a Power Booster 2 Controller. The Monsoon's reliable design is perfect for continuous sampling and purging of groundwater wells. The Power Booster 2 or Low Flow with Power Booster 2 is required to operate this pump.The 12 Volt Monsoon® can be used for low flow sampling (Fractional Flow®) all the way down to 40 mLs per minute. Need to get even lower?? How about 10 mLs per minute in conjunction with the Low Flow Sampling Control Valve.Simplify and Expedite Your Next Sampling Event!Monsoon® can operate under harsh conditions with higher turbidity.Monsoon® can run continuously in water without the need for a cool down!Monsoon® has a 400 hour motor life!Monsoon® has a sleek outside that minimizes well hang-ups.The Monsoon® is a very reliable and economical pump that provides a great bang for your buck!This pump is not engineered to be dedicated in the physical liquid 24 hours a day.Specifications:WATT CONSUMPTION (MAX): 450 WATTS (MAX) DC VOLT RECOMMENDATION: 12-15 DC (direct current) At SourceAMP CONSUMPTION (MAX): 30 AMPSMEASUREMENTS: LENGTH 20" / DIAMETER: 1.82"REQUIRED TUBING: 3/8" or 1/2" ID TUBINGSUPPLIED WITH: 130 FEET OF HEAVY DUTY 10 GAUGE WIRE & GREEN CONNECTORPUMP CONSTRUCTION: ABSIMPELLER CONSTRUCTION: POLY ACETAL (POM)MOTOR SHAFT CONSTRUCTION: STAINLESS STEEL WIRE CONSTRUCTION: PVCSEAL CONSTRUCTION: NITRILE DTW (Depth to Water) Gallons per Minute 10 4.40 20 4.20 40 3.50 50 2.80 70 2.10 80 1.90 85 1.60 100 1.50 110 1.25 120 1.00 140 N/A Test was conducted with a 12 volt deep cycle battery at 12.5 volts at battery terminals.Running your vehicle while using this pump will dramatically increase purge volume. PFOA Update - This Pump Is PFOA Free
- Data Sheets
The Engineered Plastic 12-volt submersible centrifugal Monsoon® pump is capable of pumping up to 120 feet from ground level (DTW)* by simply connecting the Monsoon® to a 12-volt deep cycle battery via a Power Booster 2 Controller. The Monsoon's reliable design is perfect for continuous sampling and purging of groundwater wells.
The Power Booster 2 or Low Flow with Power Booster 2 is required to operate this pump.
The 12 Volt Monsoon® can be used for low flow sampling (Fractional Flow®) all the way down to 40 mLs per minute. Need to get even lower?? How about 10 mLs per minute in conjunction with the Low Flow Sampling Control Valve.
Simplify and Expedite Your Next Sampling Event!
Monsoon® can operate under harsh conditions with higher turbidity.
Monsoon® can run continuously in water without the need for a cool down!
Monsoon® has a 400 hour motor life!
Monsoon® has a sleek outside that minimizes well hang-ups.
The Monsoon® is a very reliable and economical pump that provides a great bang for your buck!
This pump is not engineered to be dedicated in the physical liquid 24 hours a day.
Specifications:
WATT CONSUMPTION (MAX): 450 WATTS (MAX)
DC VOLT RECOMMENDATION: 12-15 DC (direct current) At Source
AMP CONSUMPTION (MAX): 30 AMPS
MEASUREMENTS: LENGTH 20" / DIAMETER: 1.82"
REQUIRED TUBING: 3/8" or 1/2" ID TUBING
SUPPLIED WITH: 130 FEET OF HEAVY DUTY 10 GAUGE WIRE & GREEN CONNECTOR
PUMP CONSTRUCTION: ABS
IMPELLER CONSTRUCTION: POLY ACETAL (POM)
MOTOR SHAFT CONSTRUCTION: STAINLESS STEEL
WIRE CONSTRUCTION: PVC
SEAL CONSTRUCTION: NITRILE
DTW (Depth to Water) | Gallons per Minute |
10 | 4.40 |
20 | 4.20 |
40 | 3.50 |
50 | 2.80 |
70 | 2.10 |
80 | 1.90 |
85 | 1.60 |
100 | 1.50 |
110 | 1.25 |
120 | 1.00 |
140 | N/A |
Test was conducted with a 12 volt deep cycle battery at 12.5 volts at battery terminals.
Running your vehicle while using this pump will dramatically increase purge volume.
PFOA Update - This Pump Is PFOA Free