Poseidon® 80 Remediation Pump

The low amp draw, hardworking Poseidon® Plastic Pump fits into 2 inch schedule 40 and 80, and larger diameter wells. The revolutionary Poseidon™ Remediation Pump is a 12-volt submersible pump that is designed for pumping tests or groundwater remediation. This pump is sized perfectly to fit into schedule 40 and 80 2-inch wells. This remediation pump features quick installation, easy operation and long life expectancy. Simple to install and operate: just clamp 3/8IN I.D. tubing to the pump and secure it with suspension rope or cable to the desired depth. You can power the pump with a deep cycle marine battery or one of our solar systems. You can also use the Poseidon 80 pump with the 110 volt Step Down Transformer. SpecificationsThe Poseidon® Plastic Pump consists of 4 components: The 4 Pin Bayonet Motor Module Connector, Replaceable Motor Module, Outside PVC Housing with PVC Bottom Inlet Filter Screen (Assembled as One Unit), and the Pump Wire POWER CONSUMPTION: 255 WATTS (MAX)VOLT RECOMMENDATION: 12-15 DC (direct current) At SourceMAXIMUM AMP OUTPUT: 17 AMPSMEASUREMENTS: LENGTH 7.5" / DIAMETER: 1.82"REQUIRED TUBING: 3/8" ID X 1/2" OD TUBINGSUPPLIED WITH: 90 FEET OF HEAVY DUTY 10 GAUGE WIRE WITH FLYING LEADSPUMP CONSTRUCTION:: PVC, POLYPROPYLENE, AND STAINLESS STEEL USE THE POSEIDON® 80 PLASTIC PUMP ONLY AT 40 feet DTW or deeper.Failure to do so may damage motor modules and voids all manufacture warranties DTW (Depth to Water) Gallons per Minute 10 DO NOT USE 20 DO NOT USE 30 DO NOT USE 40 2.0 50 1.75 60 1.40 70 1.25 80 1.0 90 N/A Test was conducted with a 12 volt deep cycle battery at 13.8 volts at battery terminals