.170" x .250" HDPE Bonded to .250" x .375" HDPE

SKU:
 HDPE1725-100

ECT's Intermittent or skip Bonded tubing is a two-tube bonded configuration. The tubes are color-coded to prevent line crossing and make for easier identification.

The durable and lightweight properties all make bonded tubing an ideal choice for a wide spectrum of uses including environmental water sampling, well testing, remediation, and monitoring equipment. ECT's Bonded tubing is the leading choice for bladder pump sample tubing.

What is a skip-bond? Also known as an Intermittent Bond, the bond between the two tubes is permanent, but every 6″ there is a 6″ gap where no bond has taken place, thus there is no need for separation or splitting back the tubes wherever a cut is needed. This is ideal when using compression fittings to guarantee a leak proof seal. Also eliminates scrap for cutting different lengths from large spools of bonded tubing.

Specifications
Tubing A:
Tubing Material: Polyethylene
Tubing Type: High Density / HDPE
Tubing Color: Natural
Inside Diameter: .17" or 11/64"
Outside Diameter: .25" or 1/4"
Wall Thickness: .040"
Length: 500'
Max Pressure: 260 PSI at 72°F
Temp Range: -93°F - +184°F
Hardness, Shore D: 69
Tensile Strength: 4,600 PSI

Tubing B:
Tubing Material: Polyethylene
Tubing Type: HDPE / HDPE
Tubing Color: Natural
Inside Diameter: .25" or 1/4"
Outside Diameter: .375" or 3/8"
Wall Thickness: .0625"
Length: Various
Max Pressure: 260 PSI at 72°F
Temp Range: -93°F - +184°F
Hardness, Shore D: 69
Tensile Strength: 4600 PSI

Applications
Groundwater monitoring
Bladder pump sampling
Nested vapor lines
Air sampling tubes
Laboratory applications
Water processing
PFAS and PFOA Testing Approved

See Price in Cart
$116.00
  • Description
    ECT's Intermittent or skip Bonded tubing is a two-tube bonded configuration. The tubes are color-coded to prevent line crossing and make for easier identification. The durable and lightweight properties all make bonded tubing an ideal choice for a wide spectrum of uses including environmental water sampling, well testing, remediation, and monitoring equipment. ECT's Bonded tubing is the leading choice for bladder pump sample tubing. What is a skip-bond? Also known as an Intermittent Bond, the bond between the two tubes is permanent, but every 6″ there is a 6″ gap where no bond has taken place, thus there is no need for separation or splitting back the tubes wherever a cut is needed. This is ideal when using compression fittings to guarantee a leak proof seal. Also eliminates scrap for cutting different lengths from large spools of bonded tubing. SpecificationsTubing A:Tubing Material: PolyethyleneTubing Type: High Density / HDPETubing Color: NaturalInside Diameter: .17" or 11/64"Outside Diameter: .25" or 1/4"Wall Thickness: .040"Length: 500'Max Pressure: 260 PSI at 72°FTemp Range: -93°F - +184°FHardness, Shore D: 69Tensile Strength: 4,600 PSI Tubing B:Tubing Material: PolyethyleneTubing Type: HDPE / HDPETubing Color: NaturalInside Diameter: .25" or 1/4"Outside Diameter: .375" or 3/8"Wall Thickness: .0625"Length: VariousMax Pressure: 260 PSI at 72°FTemp Range: -93°F - +184°FHardness, Shore D: 69Tensile Strength: 4600 PSI ApplicationsGroundwater monitoringBladder pump samplingNested vapor linesAir sampling tubesLaboratory applicationsWater processingPFAS and PFOA Testing Approved
  • Data Sheets

ECT's Intermittent or skip Bonded tubing is a two-tube bonded configuration. The tubes are color-coded to prevent line crossing and make for easier identification.

The durable and lightweight properties all make bonded tubing an ideal choice for a wide spectrum of uses including environmental water sampling, well testing, remediation, and monitoring equipment. ECT's Bonded tubing is the leading choice for bladder pump sample tubing.

What is a skip-bond? Also known as an Intermittent Bond, the bond between the two tubes is permanent, but every 6″ there is a 6″ gap where no bond has taken place, thus there is no need for separation or splitting back the tubes wherever a cut is needed. This is ideal when using compression fittings to guarantee a leak proof seal. Also eliminates scrap for cutting different lengths from large spools of bonded tubing.

Specifications
Tubing A:
Tubing Material: Polyethylene
Tubing Type: High Density / HDPE
Tubing Color: Natural
Inside Diameter: .17" or 11/64"
Outside Diameter: .25" or 1/4"
Wall Thickness: .040"
Length: 500'
Max Pressure: 260 PSI at 72°F
Temp Range: -93°F - +184°F
Hardness, Shore D: 69
Tensile Strength: 4,600 PSI

Tubing B:
Tubing Material: Polyethylene
Tubing Type: HDPE / HDPE
Tubing Color: Natural
Inside Diameter: .25" or 1/4"
Outside Diameter: .375" or 3/8"
Wall Thickness: .0625"
Length: Various
Max Pressure: 260 PSI at 72°F
Temp Range: -93°F - +184°F
Hardness, Shore D: 69
Tensile Strength: 4600 PSI

Applications
Groundwater monitoring
Bladder pump sampling
Nested vapor lines
Air sampling tubes
Laboratory applications
Water processing
PFAS and PFOA Testing Approved