Power Booster 2 Controller

SKU:
 PA-10700

Proactive Env Products®

The Proactive® Power Booster 2 is engineered specifically for the Tsunami®, Hurricane® and Monsoon® high performance plastic pumps. When the flow control dial is set to the lowest possible setting the controller will produce 12 volts. When the dial is set to the highest possible setting the controller will produce 24 volts. PLEASE KEEP IN MIND THIS CONTROLLER IS NOT INTENDED TO SHUT OFF THE PUMP MOTORS.

The Proactive Low Flow w/ Power Booster 2 is used to monitor and regulate low flow sampling (Fractional Flow®) as low as 40ml/min. Simply connect to a 12 Volt source.

  • Heavy duty reinforced plastic controller
  • Low voltage disconnect (LVD) at 10.75 volts (turns off controller)
  • Constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motor
  • 7 foot wire lead to battery clamps and 8 foot wire leads to pump connector
  • Breaker incorporated into controller
  • Used to monitor and regulate low flow sampling as low as 40mL/min

Can be used with the following pumps:
12 Volt Tsunami® Plastic Pump
12 Volt Hurricane® Plastic Pump
12 Volt Monsoon® Plastic Pump

See Price in Cart
$459.00
  • Description
    The Proactive® Power Booster 2 is engineered specifically for the Tsunami®, Hurricane® and Monsoon® high performance plastic pumps. When the flow control dial is set to the lowest possible setting the controller will produce 12 volts. When the dial is set to the highest possible setting the controller will produce 24 volts. PLEASE KEEP IN MIND THIS CONTROLLER IS NOT INTENDED TO SHUT OFF THE PUMP MOTORS. The Proactive Low Flow w/ Power Booster 2 is used to monitor and regulate low flow sampling (Fractional Flow®) as low as 40ml/min. Simply connect to a 12 Volt source. Heavy duty reinforced plastic controller Low voltage disconnect (LVD) at 10.75 volts (turns off controller) Constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motor 7 foot wire lead to battery clamps and 8 foot wire leads to pump connector Breaker incorporated into controller Used to monitor and regulate low flow sampling as low as 40mL/min Can be used with the following pumps:12 Volt Tsunami® Plastic Pump12 Volt Hurricane® Plastic Pump12 Volt Monsoon® Plastic Pump
  • Data Sheets

The Proactive® Power Booster 2 is engineered specifically for the Tsunami®, Hurricane® and Monsoon® high performance plastic pumps. When the flow control dial is set to the lowest possible setting the controller will produce 12 volts. When the dial is set to the highest possible setting the controller will produce 24 volts. PLEASE KEEP IN MIND THIS CONTROLLER IS NOT INTENDED TO SHUT OFF THE PUMP MOTORS.

The Proactive Low Flow w/ Power Booster 2 is used to monitor and regulate low flow sampling (Fractional Flow®) as low as 40ml/min. Simply connect to a 12 Volt source.

  • Heavy duty reinforced plastic controller
  • Low voltage disconnect (LVD) at 10.75 volts (turns off controller)
  • Constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motor
  • 7 foot wire lead to battery clamps and 8 foot wire leads to pump connector
  • Breaker incorporated into controller
  • Used to monitor and regulate low flow sampling as low as 40mL/min

Can be used with the following pumps:
12 Volt Tsunami® Plastic Pump
12 Volt Hurricane® Plastic Pump
12 Volt Monsoon® Plastic Pump