12 Volt Poseidon® 100 Plastic Pump
(Lifts 100 Feet / 31 Meters DTW)
The Poseidon® 100 submersible centrifugal pump is capable of pumping up to 100 feet from ground level (DTW)*. The Poseidon® 100 is very easy to use….Just hose clamp onto the pump barb tip a 3/8″ id polyethylene tubing and attach your desired suspension rope to the eye hook provided on top of the pump. Now lower the pump to the desired water depth. Simply, connect the required Pro Booster #1 to the pump using the accompanied weatherproof wire nuts. The final step is to hook up the Pro Booster #1 to a 12 volt deep cycle AGM battery or several other “powering” options pictured on the right side of the page. (Please note: All “powering” products on the right side of this page incorporates a “Pro Booster #1” except Crusader and 44 Amp Mobile Battery Pack)
The Poseidon® 100 pump will fit into a schedule 40 or 80 2 inch well or larger. The Poseidon® 100 can even be used in large bodies of water such as lakes, ponds or streams. In addition, it can be used for purging and sampling groundwater monitoring wells and even be used for pump testing and groundwater remediation.
Simplify and Expedite Your Next Event!
Poseidon® 100 can operate under harsh conditions with higher turbidity.
Poseidon® 100 can run continuously in water without the need for a cool down!
Poseidon® 100 has a 400 hour motor module life!
Poseidon® 100 has a sleek outside that minimizes well hang-ups.
Poseidon® 100 is a very reliable and economical pump that provides a great bang for your buck!
Easy to fix if a problem should arise: Let’s face it, mechanical parts break down after a while. The life expectancy of the motor module is around 400 hours or so. Please Keep in mind… the life of the motor module depends of course how often it is used (this is for any pump or a matter of fact anything mechanical). The great benefit of the Poseidon® 100 pump is the patented (#7584785) replaceable motor module that can be changed out within 60 seconds. That means no down time and NO expensive service calls. Just twist in the new motor module and start pumping again, truly peace of mind!! Once the new motor module is installed, your pump is essentially new and will have a life span identical to a new pump. Please note, the Poseidon® 100 pump ships to you with one motor module installed on the pump.
The Poseidon® 100 pump is engineered for ease of use. The pump consists of 4 components:
The replaceable motor module
The motor module 4 Pin Bayonet Connector
The outside PVC Housing and PVC Bottom Inlet Filter Screen
The pump power wire
THE Poseidon® 100 PUMP WIRE CANNOT BE CUT DOWN TO SHORTER LENGTHS. DOING SO WILL OVER AMP AND OVER VOLT THE MOTOR MODULE CAUSING PREMATURE FAILURE!!
*Depth To Water