Athena Peristaltic Pump w/o Internal Battery


in stock Report Abuse

Report an abuse for product Athena Peristaltic Pump w/o Internal Battery



Designed for the Field Technician in mind!

The Athena® peristaltic pump is lightweight and compact. To use, simply attach an external power source such as a 12 volt deep cycle battery to energize the pump. A high performance motor consumes only 3 amps at maximum draw making Athena® peristaltic pump extremely efficient. The rugged Pelican™ 1300 case enclosure is made of impact and corrosion resistant ABS plastic to withstand demanding work conditions. Incorporating the most accurate and precise variable speed controller for consistent flow rates will ensure the technician reliable and consistent sample integrity. Includes a built-in digital display and sealed push buttons that are used to control the Athena® peristaltic pump.

Constant Voltage Boosting Technology (CVBT)

Proprietary system that boosts a “low voltage battery” to an amazing range of 13.5-14.5 volts when pressing the up and down button. That means faster water discharge rates and more consistent pumping rates. Which in turn makes your next groundwater field sampling event a profit center!

Masterflex Easyload™ 2 pump head design

Super fast tubing load times; No more stretching and jamming silicon tubing through the pump head and defiantly no more fiddling with screws to gain access to the pump head. Located on case exterior allowing the user to easily shut the enclosure.

Precise Push Button Technology

Hook up clamps to an external battery.

Super strong – Light weight Pelican™ 1300 case

The Athena® peristaltic pump utilizes a Pelican™ 1300 case that lends hand to durability and weighs only 8 pounds. The rugged Pelican™ case enclosure is made of impact and corrosion resistant ABS plastic to withstand demanding work conditions.

Tell Me More LCD Display

Athena® LCD tells you real time flow control.

That means you will visually see your current

setting on the LCD screen when retrieving a

sample using the Athena® peristaltic pump.

Push Button Back Flushing

Supplied with a push button reversible flow feature for back-flushing.

Low Voltage Disconnect Warning (LVD)

Simply put, the LVD is a “battery saver device.”

If the external battery should ever fall below

10.75 volts the Athena® will start to pulsate or

lose noticeable power. In short, the LVD telling

you that your peristaltic pump needs a

charge. This advanced technology will prolong

the life of the battery.

Auto Reset Internal Fuse

If you should reverse polarity when hooking up the Athena® peristaltic pump to an external battery, the built-in internal resettable fuse will engage causing the pump to shut off for 30 seconds. After 30 seconds the resettable fuse, then will engage allowing the field technician to once again turn the pump back on. The internal resettable fuse will also “engage in safety mode” if it recognizes a sudden surge in amps.


  • Pumps up to 2.5 liters per minute or as low as 40 mL per minute*

  • Suction lift up to 26 feet

  • Comes complete with pump head

  • 15 feet of DC battery clamps to hook up for super long sampling events

  • Product Dimensions: Depth 9 3/4″x Width 13″ x Height 6 3/4″

  • Weight of Product: 8 Pounds

  • Please Note: The proper silicone tubing into the Masterflex Easy Load 2 Pump Head.

       Please use Masterflex or tubing comparable to:

        → MF# LS 15: 3/16″ID X 3/8″ OD

        → MF# LS 24: 1/4″ ID X 7/16″ OD

        → MF# LS 36: 3/8″ ID X 5/8″ OD

Masterflex Easyload™ 2 pump head is a registered trademark of Thermo Fisher Scientific
* Test conducted with 3 feet of size 36 Masterflex™ tubing

What is included in the box:

  • 12 Volt Athena® Peristaltic Pump (Item# ATHPERI-10000)

  • Battery Clamps & 10 Feet of Dual Male Cigarette Plug (Item# PERRY-34800)


Reviews (0)


There are no reviews yet.

Be the first to review “Athena Peristaltic Pump w/o Internal Battery”

Your email address will not be published. Required fields are marked *

More Offers

Sorry no more offers available